SD7226-170
16-bit, 170MHz, Dual Channel ADC with DSP
Overview & Features
The SD7226 is the industry smallest, a dual-channel, 16-bit, analog-to-digital converter (ADC) supporting sampling rates up to 170MSps. The device uses a multistage pipeline architecture to achieve high signal-to-noise ratio (SNR) and linearity, over wide input signal bandwidth. The SD7226 can be set to operate using either CMOS or LVDS output interface. Programming for configuration and control is accomplished using a 3-wire SPI-compatible serial bus. The digital output data can be programmed to be delivered in offset binary, twos complement format, or gray code. The device includes a DSP block that features decimation, digital down conversion (DDC), and IQ mismatch correction.
Features
• 9×9, 3.7mm×3.7mm BGA, with 0.4mm ball-pitch
• SNR: 74.4dBFS at fIN = 70.2MHz and fS = 170MSps
• SFDR: 86.3dBc at fIN = 70.2MHz and fS = 170MSps
• -155.4dBFS/Hz input-noise at fIN = 70.2MHz and fS = 170MSps
• 2.0V nominal input
• Typical power consumption: 521mW at 170MSps
• Integer 1-to-8 input clock divider (1000MHz maximum input rate)
• Sample rates of up to 170MSps
• 1.8V analog supply voltage
• LVDS (ANSI-644 levels) outputs
• Internal ADC voltage reference
• ADC clock duty cycle correction
• Serial port control
• Decimation by 2, 4
• Digital Down-Conversion
• IQ Mismatch Correction
• Energy saving power-down modes
Specification
| Product Specifications | |||
|---|---|---|---|
| Resolution | 16-bit | Speed (Msps) | 170 |
| Number of Channels | 2 | SFDR (dBc)@70.2MHz | 86.3 |
| SNR (dBFS)@70.2MHz | 74.4 | ||